Fire Resistant Insulation Complements Safety Systems

It is all too easy for an accidental spark to start a blaze. And, as the nation has recently seen, weather can prolong and expand the reach of the flames. However, using fire resistant foam as insulation in your home or office offers some defense against smaller blazes.

Foam insulation spray offers another means of insulating a building. It is cost effective in the energy output it saves you. It is also greener than other insulating materials and flame resistant.

Foam is effective as a sealant because it expands to fill every crevice and empty space, even between joists and joints. In this way, the insulator keeps out air, dust, and pests.

As part of a complete fire protection system, its sealing feature is also a great benefit. With the foam, you don't have to worry about air pockets within the material where combustibles can collect or cause other hazardous problems.

You also don't have to worry about the flames getting into unfilled pockets to either burn your building from the inside out or become hotbeds should a fire occur. Additionally, the spray insulation keeps air out, prevents more air from reaching a blaze or causing dangerous backdrafts.

One of the best features about fire resistant insulation is that the material itself doesn't burn. Even if fire somehow gets into the insulation, the foam doesn't catch fire. Admittedly, after prolonged exposure to flames, the surface shows charring, but the flames never take hold. Considering the cost of rampant fire damage, charring is an acceptable and more affordable trade off.

In trial tests, investigators built three sample crawl spaces. This trial was conducted to compare the performances of one type of insulator to an untreated "calibration" construction. This first was used for a calibration test. The other two were treated with one type of a spray in insulation product. Each crawl space was tested to a "failure time" in which the flames consumed the plywood or could no longer be sustained.

The calibration deck exhibited steady flames from the front after 6 minutes of exposure to a flame source placed inside the construct. After 9:30 minutes, the blaze penetrated the plywood.

The second and third tests reflected similar results, which surpassed the results of industry standard tests. Specifically, after 1:40 minutes, the controlled blaze ate into the insulation surface, but there was no ignition. After 3:40 minutes, there was sporadic ignition of the foam's surface. Ignition stopped after 8:30 minutes. In nearly ten minutes of exposure, there was no burn through of the test material nor the plywood above it.

The investigators allowed the flame to burn until the test collapsed, a period of nearly twenty minutes. The test was finally ended after 26 minutes.

There was charring over the entire insulating surface, and some loss of material where the flames touched the surface, but the plywood was completely intact as was the majority of the spray in material.

Other products don't last nearly as long in tests. Clearly, fire resistant insulation is an effective way to protect your building. The benefits are clear from the tests.

Choosing an environmentally friendly, easy to install and flame resistant product would be a great protection. Easy installation of foam insulation spray, allows you to spray it into a new or existing building. Foam systems for fire protection and insulation are a smart and efficient choice for any building.

Article Source: http://www.majorarticle.com

Fire hazards are a concern for any building owner. Creating a safe structure is a primary consideration. Employing fire resistant insulation is a smart choice. Visit Apex Foam Industries to see how their products can serve your needs. www.apexfoam.com

Related Topics

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated